The Highside is a 3 channel sports glider with a 1397mm span (55'') and designed by Lindsay Todd here in the UK. The plan originally came free with the RCM & E in November 2016.
Slope Soaring Sussex is a friendly group of RC glider flying enthusiasts based in Sussex, UK. We slope soar at various locations on the South Downs and have a field for thermal soaring. ‘Slope Soaring Sussex’ is a BMFA affiliated RC Glider-only flying club. We fly many types of RC gliders from conventional slope soarers to Scale, DLG, F3B, F3J, F5J, PSS and more. Our aim is to encourage and promote safe, responsible and enjoyable radio controlled model flying. New and experienced flyers welcome.
Tuesday, 3 October 2017
My next challenge - Highside Sports Glider
After all the fun and games trying to build the Limit Mk3, I have decided to give plan building another go. I have purchased a plan of a Highside glider plan from eBay and the short kit and balsa pack from SLEC http://www.slecuk.com/balsa-wood/Highside-Glider-CNC-Pack-PRC001.html
The Highside is a 3 channel sports glider with a 1397mm span (55'') and designed by Lindsay Todd here in the UK. The plan originally came free with the RCM & E in November 2016.
I'm not in any rush to complete this build and especially as I'm going to build it at my work where I have decent lighting and a good solid workbench to work off. I wanted a new building board and looked around on the internet to find an alternative to the £30 balsa building board I had borrowed from Tim to build the Limit Mk3. There were lots of recommendations for using plaster board. This being flat and easy to pin to. B & Q had just what I wanted for £4 (a sheet of board 1200mm W x 600mm deep x 12.5mm thick - http://www.diy.com/departments/gyproc-handiboard-square-edge-plasterboard-l1220mm-w600mm-t125mm/128389_BQ.prd
Here we are set up with the 'protect-a-plan' plastic cover from the Balsa Cabin to protect the plan - https://balsacabin.co.uk/product/protect-a-plan/
The Highside is a 3 channel sports glider with a 1397mm span (55'') and designed by Lindsay Todd here in the UK. The plan originally came free with the RCM & E in November 2016.
Subscribe to:
Post Comments (Atom)
I use plasterboard over a mdf board then just use clingfilm over the top of the plan.
ReplyDeleteI used cling film on the last model I just made but found that my white glue actually stuck itself to the cling film and as you tried to pick up what you glued it would tear the cling film. Got fed up with it after a while, that’s why I chose the thicker plan covering from the Balsa Cabin but to be honest any thicker polythene sheet would do I suspect.
DeleteGreat looking model Paul, I know that you'll probably enjoy building this one after our frustrating Limit Mk3 builds, this should be relatively easy for the sake of the size of it at least....I don't know the model but it looks a lovely traditional build...
ReplyDeleteIt looks like the balsa bashing bug has finally bitten you Paul. I like the trendy design/traditional build combination, it's a bit like the Quark from Island Models.
ReplyDeleteDear friends. Can you help me where can I found a copy of Highside sloper to build. I've lost 2016 nov RCM&E..
ReplyDeleteThanks
I got mine off eBay. There are sellers on their for back copies of the RCM & E.
ReplyDelete