Hi All,
Following my sessions with Jim and Ray lately, I decided to set up my transmitter to work in wireless trainer mode, so I can take control and hand control of a model during training. It was surprisingly easy and I used my old Dx6i DSM2 transmitter as the 'slave' and my Dx9 as the 'Master'. It's simply a case of 'binding' the 'Master' to a model, then enter 'wireless trainer mode' and 'bind' the slave transmitter to the 'master'. Hey presto, I'm now set up to be able to help members who are training / learning without having to grab their transmitter to regain control.
I should have done this a long time ago ! ......
Rob
Slope Soaring Sussex is a friendly group of RC glider flying enthusiasts based in Sussex, UK. We slope soar at various locations on the South Downs and have a field for thermal soaring. ‘Slope Soaring Sussex’ is a BMFA affiliated RC Glider-only flying club. We fly many types of RC gliders from conventional slope soarers to Scale, DLG, F3B, F3J, F5J, PSS and more. Our aim is to encourage and promote safe, responsible and enjoyable radio controlled model flying. New and experienced flyers welcome.
Hi Rob
ReplyDeleteMake sure you have "Master Over-Ride" active.
This allows you to back control of the Master tx. by just making an imput on the Master tx. Saves having to operate switch in an emergency.
Tim
Hi Tim, Many thanks for the advice, I was going to ask you how to set this all up, but it turned out to be so simple I was able to do it on my own !
Delete